LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xB Standard >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Outer Mirror Switch >> Removal

Outer Mirror Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE: Wait at least 90 seconds after disconnecting the cable to prevent the airbag working.
  2. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH  (See REMOVAL )
  3. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH  (See REMOVAL )
  4. REMOVE FRONT PILLAR GARNISH RH  (See REMOVAL )
  5. REMOVE FRONT PILLAR GARNISH LH  (See REMOVAL )
  6. REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY  (See REMOVAL )
  7. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY  (See REMOVAL )
  8. REMOVE COMBINATION METER ASSEMBLY  (See REMOVAL )
  9. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY  (See REMOVAL )
  10. REMOVE NO. 1 SWITCH HOLE BASE  (See REMOVAL )
  11. REMOVE OUTER MIRROR SWITCH ASSEMBLY 
    1. Disengage the 2 claws and remove the outer mirror switch assembly.
      Fig 1: Identifying Outer Mirror Switch Assembly Claws
      G05391367Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals