Outer Mirror Switch: Inspection
- INSPECT OUTER MIRROR SWITCH ASSEMBLY
- The L position of the left/right adjustment switch: Measure the resistance of the outer mirror switch assembly.
Standard resistance (for left side)
TESTER CONNECTION SPECIFIED CONDITION CHART (LEFT SIDE)Tester Connection Switch Condition Specified Condition 4 (VL) - 8 (B)
6 (M+) - 7 (E)UP Below 1 Ω OFF 10 kΩ or higher 4 (VL) - 7 (E)
6 (M+) - 8 (B)DOWN Below 1 Ω OFF 10 kΩ or higher 5 (HL) - 8 (B)
6 (M+) - 7 (E)LEFT Below 1 Ω OFF 10 kΩ or higher 5 (HL) - 7 (E)
6 (M+) - 8 (B)RIGHT Below 1 Ω OFF 10 kΩ or higher If the result is not as specified, replace the outer mirror switch assembly.
- The R position of the left/right adjustment switch: Measure the resistance of the outer mirror switch assembly.
Standard resistance (for right side)
TESTER CONNECTION SPECIFIED CONDITION CHART (RIGHT SIDE)Tester Connection Switch Condition Specified Condition 3 (VR) - 8 (B)
6 (M+) - 7 (E)UP Below 1 Ω OFF 10 kΩ or higher 3 (VR) - 7 (E)
6 (M+) - 8 (B)DOWN Below 1 Ω OFF 10 kΩ or higher 2 (HR) - 8 (B)
6 (M+) - 7 (E)LEFT Below 1 Ω OFF 10 kΩ or higher 2 (HR) - 7 (E)
6 (M+) - 8 (B)RIGHT Below 1 Ω OFF 10 kΩ or higher If the result is not as specified, replace the outer mirror switch assembly.
- The L position of the left/right adjustment switch: Measure the resistance of the outer mirror switch assembly.