Shift Lever: Reassembly

INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
1. Engage the 3 claws, and install the shift lock control ECU onto the shift lock control unit assembly.
2. Connect the connector.
  
  Fig 1: Locating Shift Lock Control ECU Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER POSITION INDICATOR HOUSING
1. Engage the 2 claws, and install the lower position indicator housing onto the shift lock control unit assembly.
Fig 2: Identifying Lower Position Indicator Housing Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT LOCK RELEASE SPRING
1. Install the shift lock release spring into the shift lock control unit assembly.
INSTALL SHIFT LOCK RELEASE BUTTON
1. Engage the 2 claws, and install the shift lock release button into the shift lock control unit assembly.
  
  Fig 3: Identifying Shift Lock Release Button Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 POSITION INDICATOR SLIDE COVER
1. Install the No. 2 slide cover onto the slide cover.
  
  Fig 4: Locating No. 2 Position Indicator Slide Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL POSITION INDICATOR SLIDE COVER
1. Install the slide cover onto the shift lock control unit assembly.
  
  Fig 5: Identifying Position Indicator Slide Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL POSITION INDICATOR LIGHT GUIDE
1. Engage the 4 claws, and install the position indicator light guide onto the shift lock control unit assembly.
  
  Fig 6: Identifying Position Indicator Light Guide Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY
1. Securely connect the 2 wire terminals to terminal 7 (ILL+) and 14 (ILL-) of the transmission control switch connector. Then push the connector housing retainer to lock it.
  
  Fig 7: Identifying Transmission Control Switch Connector Terminals
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the transmission control switch connector onto the shift lock control unit assembly.
3. Connect the indicator light wire onto the 7 clamps of the shift lock control unit assembly.
  
  Fig 8: Locating Indicator Light Wire Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Align the wire with the key part of the lower position indicator housing. Then rotate the wire clockwise until it locks.
INSTALL SHIFT LOCK RELEASE BUTTON COVER
1. Install the shift lock release button cover onto the position indicator housing.
  
  Fig 9: Locating Shift Lock Release Button Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY
1. Engage the 4 claws, and install the position indicator housing onto the shift lock control unit assembly.
  
  Fig 10: Identifying Floor Shift Position Indicator Housing Sub-Assembly Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002