Shift Lever: Disassembly

REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY
1. Disengage the 4 claws using a screwdriver and remove the position indicator housing.
  
  Fig 1: Identifying Floor Shift Position Indicator Housing Sub-Assembly Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LOCK RELEASE BUTTON COVER
1. Remove the shift lock release button cover.
REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
1. Rotate the indicator light wire counterclockwise to align the key part and separate the wire.
  
  Fig 2: Locating Shift Lock Release Button Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the indicator light wire from the 7 clamps of the shift lock control unit assembly.
  
  Fig 3: Locating Indicator Light Wire Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a screwdriver, disconnect the clamp on the transmission control switch connector.
4. Using a screwdriver, pull the 7 (ILL+) and 14 (ILL-) terminals out from the rear.
  
  Fig 4: Identifying Transmission Control Switch Connector Terminals
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POSITION INDICATOR LIGHT GUIDE
1. Disengage the 4 claws using a screwdriver and remove the position indicator light guide.
  
  Fig 5: Identifying Position Indicator Light Guide Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POSITION INDICATOR SLIDE COVER
1. Remove the position indicator slide cover.
  
  Fig 6: Identifying Position Indicator Slide Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 POSITION INDICATOR SLIDE COVER
1. Remove the No. 2 position indicator slide cover.
  
  Fig 7: Locating No. 2 Position Indicator Slide Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LOCK RELEASE BUTTON
1. Disengage the 2 claws using a screwdriver and remove the shift lock release button.
Fig 8: Identifying Shift Lock Release Button Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LOCK RELEASE SPRING
1. Remove the shift lock release spring from the shift lock control unit.
REMOVE LOWER POSITION INDICATOR HOUSING
1. Disengage the 2 claws using a screwdriver and remove the lower position indicator housing.
  
  Fig 9: Identifying Lower Position Indicator Housing Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
1. Disconnect the connector.
2. Disengage the 3 claws using a screwdriver and remove the shift lock control ECU.
  
  Fig 10: Locating Shift Lock Control ECU Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002