Combination Meter: Removal

WARNING: This page is about a different car, the 2008 Scion xB. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (See REMOVAL ).
REMOVE COMBINATION METER ASSEMBLY
1. Remove the 4 screws and remove the combination meter.
  
  Fig 1: Locating Combination Meter Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Separate the wire harness.
3. Disconnect the 2 connectors.
  
  Fig 2: Locating Wire Harness Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002