LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xB Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Meter >> Light Control Rheostat >> Removal

Light Control Rheostat: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
  2. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH  (See REMOVAL ).
  3. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH  (See REMOVAL ).
  4. REMOVE FRONT PILLAR GARNISH RH  (See REMOVAL ).
  5. REMOVE FRONT PILLAR GARNISH LH  (See REMOVAL ).
  6. REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY  (See REMOVAL ).
  7. REMOVE INSTRUMENT CLUSTER FINISH LOWER PANEL  (See REMOVAL ).
  8. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY  (See REMOVAL ).
  9. REMOVE COMBINATION METER ASSEMBLY  (See REMOVAL  ).
  10. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY  (See REMOVAL ).
  11. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY  (See REMOVAL ).
  12. REMOVE NO. 1 SWITCH HOLE BASE  (See REMOVAL ).
  13. REMOVE LIGHT CONTROL RHEOSTAT 
    1. Disengage the 2 claws and remove the light control rheostat.
      Fig 1: Identifying Light Control Rheostat Claws
      G05391154Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals