LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> tC Standard >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust Assembly >> Exhaust Pipe >> Removal

Exhaust Pipe: Removal

  1. DISCONNECT CABLE FROM BATTERY NEGATIVE TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)  (See REMOVAL )
  3. REMOVE FRONT FLOOR PANEL BRACE 
    1. Remove the 4 bolts and floor panel brace.
      Fig 1: Locating Front Floor Panel Brace With Bolts
      G05538585Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE TAILPIPE ASSEMBLY 
    1. Remove the 2 bolts and 2 compression springs.
    2. Remove the tailpipe from the 3 pipe supports.
    3. Remove the gasket from the center exhaust pipe.
      Fig 2: Locating Bolts And Compression Springs
      G05538586Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE CENTER EXHAUST PIPE ASSEMBLY 
    1. Remove the 2 bolts.
    2. Remove the center exhaust pipe from the 2 pipe supports.
    3. Remove the gasket from the front exhaust pipe.
      Fig 3: Locating Exhaust Pipe Supports And Bolts
      G05538587Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE FRONT EXHAUST PIPE ASSEMBLY 
    1. Remove the 2 bolts, 2 compression springs and front exhaust pipe.
    2. Remove the gasket from the manifold.
      Fig 4: Locating Front Exhaust Pipe With Compression Springs And Bolts
      G05538588Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE EXHAUST PIPE SUPPORT 
    1. Remove the 5 exhaust pipe supports from the body.
      Fig 5: Locating Exhaust Pipe Supports To Body
      G05538589Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals