Rear Upper Control Arm: Installation

INSTALL REAR UPPER CONTROL ARM ASSEMBLY
1. Install the camber adjust cam from the front side of the vehicle, and temporarily fix it with the nut and the No. 2 camber adjust cam.
  
  Fig 1: Aligning Matchmarks
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the upper control arm, and temporarily tighten the bolt and nut.
INSTALL REAR WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
STABILIZE SUSPENSION (See INSTALLATION )

Fig 2: Locating Upper Control Arm Bolt And Nut
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
FULLY TIGHTEN REAR UPPER CONTROL ARM ASSEMBLY
1. Fully tighten the bolt and nut.
  Torque: 74 N*m (755 kgf*cm, 55 ft.*lbf)
  
  NOTE: When installing the bolt, hold the nut in place.
  
  Fig 3: Locating Upper Control Arm Bolt And Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Align the matchmarks, and fully tighten the nut.
  Torque: 74 N*m (755 kgf*cm, 55 ft.*lbf)
INSPECT AND ADJUST REAR WHEEL ALIGNMENT
1. Inspect and adjust the rear wheel alignment (see ADJUSTMENT ).
  
  Fig 4: Aligning Matchmarks
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002