Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS CHART
| Monitor runs whenever the following DTCs are not present | P0128 (Thermostat) P0136, P0137, P0138, P0139 (HO2 sensor) P0420 (Catalyst) P0505 (Idle speed control) P050A (Cold start strategy) |
| Active A/F control | Performing |
| Active A/F control performed when the following conditions are met: | - |
| Engine coolant temperature | 75°C (167°F) or more |
| Battery voltage | 11 V or more |
| Idle | OFF |
| Engine RPM | Less than 4, 000 rpm |
| A/F sensor status | Activated |
| Fuel-cut | OFF |
| Engine load | 10 to 70% |
| Shift position | 2 or more |
| Catalyst monitor | Not yet |
| Intake air amount | 4 to 16g/sec |