LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> tC Automatic >> Repair and Diagnosis >> Body & Frame >> Seats >> Rear Seat Assembly >> Installation

Rear Seat Assembly: Installation

  1. INSTALL NO. 3 SEAT LEG SUB-ASSEMBLY 
    1. Install the seat leg with the 4 bolts.

      Torque: 40 N*m (408 kgf*cm, 30 ft.*lbf) 

    2. Install the floor carpet with the 2 clips.
  2. INSTALL REAR SEAT CUSHION LOCK HOOK 
    1. Attach the claws to install the 2 lock hooks.
  3. INSTALL REAR SEATBACK ASSEMBLY LH 
    1. Place the seat in the cabin.
      NOTE: Be careful not to damage the vehicle body.
    2. Tighten the 4 bolts in the order indicated in the illustration.

      Torque: 40 N*m (408 kgf*cm, 30 ft.*lbf) 

      Fig 1: Identifying Bolts Tightening Sequence
      G05542013Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL REAR SEATBACK ASSEMBLY RH 
    1. Place the seat in the cabin.
      NOTE: Be careful not to damage the vehicle body.
    2. Tighten the 4 bolts in the order indicated in the illustration.

      Torque: 40 N*m (408 kgf*cm, 30 ft.*lbf) 

    3. Install the rear seat outer belt floor anchor with the bolt.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      Fig 2: Identifying Bolts Tightening Sequence
      G05542014Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL REAR NO. 1 FLOOR BOARD  ( INSTALLATION )
  6. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET 
    1. Install the 3 brackets with the 3 bolts.

      Torque: 19.6 N*m (200 kgf*cm, 14 ft.*lbf) 

  7. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER 
    1. Attach the 12 claws to install the 3 anchor covers.
  8. INSTALL NO. 1 DECK BOARD  ( INSTALLATION )
    Fig 3: Identifying Child Restraint Seat Tether Anchor Cover Claws
    G05542015Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. INSTALL REAR SEAT CUSHION ASSEMBLY 
    1. Attach the 2 seat cushion's rear hooks to the seatback frame.
    2. Insert the inner belts through the slits on the seat cushion.
      Fig 4: Identifying Seat Cushion's Rear Hooks To Seatback Frame
      G05542016Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Attach the 2 seat cushion's front hooks to the rear seat cushion lock hooks.
    4. Confirm that the seat cushion is firmly installed.
  10. INSTALL DECK BOARD SUB-ASSEMBLY 
  11. INSTALL TONNEAU COVER ASSEMBLY 
    Fig 5: Identifying Seat Cushion's Front Hooks To Rear Seat Cushion Lock Hooks
    G05542017Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals