LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2008 >> xD Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> U341E Automatic Transaxle >> Transmission Wire >> Inspection

Transmission Wire: Inspection

  1. INSPECT TRANSMISSION WIRE 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Tester Connection Condition Specified Condition
      1 (THO) - 6 (E2) Always 79Ω to 156 kΩ
      1 (THO) - Body ground Always 10 kΩ or higher
      6 (E2) - Body ground Always 10 kΩ or higher

      HINT:

      If the resistance is out of the specified range with the ATF temperature shown in the table below, the driveability of the vehicle may decrease.

      ATF TEMPERATURE AND RESISTANCE SPECIFICATION

      ATF Temperature Specified Condition
      10°C (50°F) 5 to 8 kΩ
      25°C (77°F) 2.5 to 4.5 kΩ
      110°C (230°F) 0.22 to 0.28 kΩ
      Fig 1: Identifying Transmission Wire Connector Terminals
      G05399917Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the resistance is not as specified, replace the transmission wire.

scientia non olet · About LEMON Manuals