LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2008 >> xD Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> U341E Automatic Transaxle >> Shift Lever >> Removal

Shift Lever: Removal

  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 
    1. Remove the shift lever knob sub-assembly from the shift lever.
  2. REMOVE UPPER CONSOLE PANEL  (See REMOVAL )
  3. REMOVE REAR CONSOLE BOX COVER  (See REMOVAL )
  4. REMOVE CONSOLE BOX CARPET  (See REMOVAL )
  5. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE FRONT CONSOLE BOX  (See REMOVAL )
  7. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY 
    1. Disconnect the transmission control cable assembly from the transmission floor shift assembly.
      Fig 1: Locating Transmission Control Cable Assembly Bolt
      G04831143Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the nut and separate the transmission control cable assembly from the shift lever retainer.
      3. Fig 2: Separating Transmission Control Cable Assembly
      G04831144Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE FLOOR SHIFT ASSEMBLY 
    1. Separate the shift lock control computer connector and indicator light wire sub-assembly connector.
    2. Separate the 2 wire harness clamps from the transmission floor shift assembly.
    3. Remove the 4 bolts and remove the transmission floor shift assembly.
      Fig 3: Locating Transmission Floor Shift Assembly Bolts
      G05400001Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals