Oil Pump: Reassembly

INSTALL CLUTCH DRUM OIL SEAL RING
1. Coat 2 new clutch drum oil seal rings with ATF, and install them to the stator shaft.
  
  Fig 1: Locating Clutch Drum Oil Seal Rings
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT OIL PUMP OIL SEAL
1. Using SST, install a new front oil pump oil seal to the oil pump body.
  SST 09950-60010 (09951-00550), 09950-70010 (09951-07100)
  
  Oil seal drive in depth:
  
  -0.15 to 0.15 mm (-0.006 to 0.006 in.)
  
  Fig 2: Installing Front Oil Pump Oil Seal To Oil Pump Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT OIL PUMP DRIVEN GEAR
1. Coat the front oil pump driven gear with ATF, and install it to the oil pump body with the marked side facing upward.
  
  Fig 3: Identifying Mark On Front Oil Pump Driven Gear
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT OIL PUMP DRIVE GEAR
1. Coat the front oil pump drive gear with ATF, and install it to the oil pump body with the marked side facing upward.
  
  Fig 4: Identifying Mark On Front Oil Pump Drive Gear
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STATOR SHAFT ASSEMBLY
1. Using a "TORX" socket wrench T30, install the stator shaft assembly with 10 "TORX" screws.
  Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf)
  
  Fig 5: Identifying Stator Shaft Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT OIL PUMP ASSEMBLY
1. Turn the drive gear with 2 screwdrivers and make sure that it rotates smoothly.
  NOTE: Do not damage the oil seal lip.
  
  Fig 6: Turning Drive Gear With Screwdrivers
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT OIL PUMP BODY O-RING
1. Coat a new front oil pump body O-ring with ATF, and install it to the oil pump.
  
  Fig 7: Identifying Front Oil Pump Body O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002