LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2008 >> xD Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> U341E Automatic Transaxle >> Oil Pump >> Disassembly

Oil Pump: Disassembly

  1. REMOVE FRONT OIL PUMP BODY O-RING 
    1. Remove the front oil pump body O-ring from the oil pump.
      Fig 1: Identifying Front Oil Pump Body O-Ring
      G04831453Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE STATOR SHAFT ASSEMBLY 
    1. Using a "TORX" socket wrench T30, remove the 10 "TORX" screws.
      Fig 2: Identifying Stator Shaft Assembly Screws
      G04831454Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE FRONT OIL PUMP DRIVE GEAR 
    1. Remove the front oil pump drive gear from the oil pump body.
      Fig 3: Identifying Front Oil Pump Drive Gear
      G04831455Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE FRONT OIL PUMP DRIVEN GEAR 
    1. Remove the front oil pump driven gear from the oil pump body.
      Fig 4: Identifying Front Oil Pump Driven Gear
      G04831456Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE FRONT OIL PUMP OIL SEAL 
    1. Using SST, remove the front oil pump oil seal from the oil pump body.

      SST 09308-00010 

      Fig 5: Removing Front Oil Pump Oil Seal From Oil Pump Body
      G04831457Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE CLUTCH DRUM OIL SEAL RING 
    1. Using a screwdriver, remove the 2 clutch drum oil seal rings from the stator shaft assembly.
      Fig 6: Locating Clutch Drum Oil Seal Rings
      G04831458Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals