LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2008 >> xD Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> U341E Automatic Transaxle >> Automatic Transaxle Assembly >> Removal

Automatic Transaxle Assembly: Removal

  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE 

    HINT:

    See the steps from "DISCHARGE FUEL SYSTEM PRESSURE" through "REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY" (See REMOVAL ).

  2. REMOVE ENGINE LATERAL CONTROL ROD 
    1. Remove the 3 bolts and remove the engine lateral control rod from the automatic transaxle.
      Fig 1: Locating Engine Lateral Control Rod Bolts
      G05400047Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE FLYWHEEL HOUSING UNDER COVER 
    1. Remove the flywheel housing under cover.
      Fig 2: Identifying Flywheel Housing Under Cover
      G04831209Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE DRIVE PLATE AND TORQUE CONVERTER CLUTCH SETTING BOLT 
    1. Remove the 6 torque converter set bolts while holding the crankshaft pulley bolt with a wrench.
      Fig 3: Identifying Torque Converter Set Bolts
      G04831210Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. SEPARATE INLET NO. 1 OIL COOLER TUBE 
    1. Using union nut wrench, separate the inlet No. 1 oil cooler tube while holding the oil cooler tube union with a wrench.
      Fig 4: Removing Inlet No 1 Oil Cooler Tube
      G05400050Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. SEPARATE OUTLET NO. 1 OIL COOLER TUBE 
    1. Using union nut wrench, separate the outlet No. 1 oil cooler tube while holding the oil cooler tube union with a spanner.
      Fig 5: Removing Outlet No 1 Oil Cooler Tube
      G05400051Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE NO. 2 OIL COOLER TUBE CLAMP 
    1. Remove the bolt and remove No. 2 oil cooler tube clamp from the oil filler tube.
      2. Fig 6: Locating No 2 Oil Cooler Tube Clamp Bolt
      G05400052Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the inlet No. 1 oil cooler tube and the No. 1 outlet oil cooler tube from the automatic transaxle.
  8. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY 
    1. Remove the bolt and remove the oil filler tube subassembly.
      2. Fig 7: Locating Oil Filler Tube Bolt
      G05400053Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the O-ring from the oil filler tube subassembly.
  9. REMOVE TRANSMISSION CONTROL CABLE SUPPORT 
    1. Remove the bolt and remove the transmission control cable bracket from the automatic transaxle.
      Fig 8: Locating Transmission Control Cable Bracket Bolt
      G05400054Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE NO. 1 TRANSMISSION CONTROL CABLE BRACKET 
    1. Remove the 2 bolts and remove the No. 1 transmission control cable bracket from the automatic transaxle.
      Fig 9: Locating Transmission Control Cable Bracket Bolts
      G05400055Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE ENGINE MOUNTING BRACKET LH 
    1. Remove the 4 bolts and remove the engine mounting bracket LH from the automatic transaxle.
      2. Fig 10: Locating Engine Mounting Bracket Bolts
      G05400056Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. REMOVE FLYWHEEL HOUSING SIDE COVER  (See REMOVAL )
  13. REMOVE STARTER ASSEMBLY  (See REMOVAL )
  14. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY 
    1. Remove the 7 bolts and remove the automatic transaxle from the engine.
      2. Fig 11: Locating Automatic Transaxle Assembly Bolts
      G04828758Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. REMOVE TORQUE CONVERTER CLUTCH ASSEMBLY 
    1. Remove the torque converter clutch from the automatic transaxle.
scientia non olet · About LEMON Manuals