LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2008 >> xD Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> 2ZR-FE Fuel >> Fuel Sender Gauge Assembly >> Installation

Fuel Sender Gauge Assembly: Installation

  1. INSTALL FUEL SENDER GAUGE ASSEMBLY 
    1. Install the fuel sender gauge by sliding it downward.
      Fig 1: Installing Fuel Sender Gauge
      G04829095Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the fuel sender gauge connector.
      Fig 2: Locating Fuel Sender Gauge Connector
      G04833461Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY  (See INSTALLATION  )
  3. INSTALL FUEL PUMP GAUGE RETAINER  (See INSTALLATION  )
  4. CONNECT FUEL TANK VENT HOSE  (See INSTALLATION  )
  5. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY  (See INSTALLATION  )
  6. INSTALL REAR FLOOR SERVICE HOLE COVER  (See INSTALLATION  )
  7. INSTALL REAR SEAT ASSEMBLY  (See INSTALLATION )
  8. INSTALL NO. 2 SEAT LEG COVER  (See INSTALLATION )
  9. INSTALL NO. 1 SEAT LEG COVER  (See INSTALLATION )
  10. INSPECT FOR FUEL LEAK  (See FUEL SYSTEM  )
scientia non olet · About LEMON Manuals