LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2008 >> tC Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> U241E Automatic Transaxle >> Transmission Revolution Sensor >> Removal

Transmission Revolution Sensor: Removal

  1. REMOVE BATTERY 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE BATTERY CARRIER  (See REMOVAL  )
  3. REMOVE AIR CLEANER ASSEMBLY  (See REMOVAL )
  4. REMOVE SPEED SENSOR (NT SENSOR) 
    1. Disconnect the sensor connector.
      2. Fig 1: Identifying Speed Sensor (NT Sensor)
      G05539356Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and sensor.
  5. REMOVE SPEED SENSOR (NC SENSOR) 
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
      Fig 2: Identifying Bolt And Sensor
      G05539357Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals