2AZ-FE Starting: Starter: Installation

INSTALL STARTER ASSEMBLY
1. Install the starter with the 2 bolts.
  Torque: 37 N*m (380 kgf*cm, 27 ft.*lbf)
  
  Fig 1: Identifying Starter With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the starter wire with the nut.
  Torque: 9.8 N*m (100 kgf*cm, 7 ft.*lbf)
  
  Fig 2: Identifying Starter Wire With Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Cover the terminal cap.
4. Connect the starter connector.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.