How To Proceed With Troubleshooting

HINT:

Use this procedure to troubleshoot the wireless door lock control system.

1. VEHICLE BROUGHT TO WORKSHOP 
2. INSPECT BATTERY VOLTAGE 

   Standard voltage: 

   11 to 14 V 

   If the voltage is below 11 V, recharge or replace the battery before proceeding.

3. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK 
4. PROBLEM SYMPTOMS TABLE 

   Result 

   RESULT REFERENCE
   
   

   Result	Proceed to
   Fault is not listed on problem symptoms table	A
   Fault is listed on problem symptoms table	B

   B: Go to step 5 

   A: Go to next step 

5. OVERALL ANALYSIS AND TROUBLESHOOTING 
   1. See TERMINALS OF ECU 
   2. See OPERATION CHECK 
6. ADJUST, REPAIR OR REPLACE 
7. CONFIRMATION TEST 

   NEXT: END