Front Bumper: Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL FRONT BUMPER SIDE SUPPORT LH 
   1. Attach the 2 clips to install the side support.
   2. Install the screw and bolt.

      Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf) for screw 

      12 N*m (122 kgf*cm, 9 ft.*lbf) for bolt 

   Fig 1: Identifying Clip And Side Support
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL FRONT BUMPER SIDE SUPPORT RH 
   1. Attach the 2 clips to install the side support.
   2. Install the screw and bolt.

      Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf) for screw 

      12 N*m (122 kgf*cm, 9 ft.*lbf) for bolt 

3. INSTALL FRONT BUMPER REINFORCEMENT 
   1. Install the reinforcement with the 6 nuts.
4. INSTALL FRONT BUMPER ENERGY ABSORBER 
5. INSTALL FRONT BUMPER COVER 
   1. Put protective tape under the front fender.
   2. Attach the 6 claws labeled A and 2 claws to install the bumper cover.
      Fig 2: Identifying Protective Tape Under Front Fender

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Install the 3 screws, 2 bolts, clip labeled A, 2 clips labeled B and 2 radiator protectors.

      Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf) for screw 

      12 N*m (122 kgf*cm, 9 ft.*lbf) for bolt 

6. INSTALL FRONT FENDER LINER LH 
   1. Install the fender liner with the 3 screws.

      Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf) 

   Fig 3: Identifying Fender Liner With Screws
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. INSTALL FRONT FENDER LINER RH 
   1. Install the fender liner with the 3 screws.

      Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf)