LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2007 >> tC Spec, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior >> Front Bumper >> Disassembly

Front Bumper: Disassembly

  1. REMOVE HOOD TO FRONT END PANEL SEAL 
    1. Using a clip remover, detach the 8 clips and remove the panel seal.
  2. REMOVE FRONT BUMPER REINFORCEMENT 
    1. Using a clip remover, remover the 2 clips and reinforcement from the bumper cover.
  3. REMOVE RADIATOR GRILLE LOWER 
  4. REMOVE FRONT BUMPER HOLE COVER 
  5. REMOVE FRONT BUMPER GUARD COVER LH 
    1. Using a screwdriver, detach the 3 claws and remove the cover.

      HINT:

      Tape the screwdriver tip before use.

      2. Fig 1: Identifying Claws Location
      G04867719Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE FRONT BUMPER GUARD COVER RH 

    HINT:

    Use the same procedures described for the LH side.

scientia non olet · About LEMON Manuals