Park / Neutral Position Switch: Inspection
WARNING: This page is about a different variant/trim than selected.
- INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard resistance
PARK/NEUTRAL POSITION SWITCH ASSEMBLY STANDARD RESISTANCE SPECIFICATIONS
| Tester Connection |
Condition |
Specified Condition |
| 1 -2 |
Shift position R |
Below 1 Ω |
| 1 -2 |
Any shift position except R |
10 kΩ or higher |
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002