Steering Pad Switch: Inspection
- INSPECT STEERING PAD SWITCH LH
- Measure the resistance according to the values in the table below.
Standard resistance
STEERING PAD SWITCH STANDARD RESISTANCE SPECIFICATIONS (LH)Tester connection Condition Specified condition AU1-EAU No switch is pushed Approx. 100 kΩ AU1-EAU SEEK+ switch: push Approx. 0 Ω AU1-EAU SEEK- switch: push Approx. 0.3 kΩ AU1-EAU VOL+ switch: push Approx. 1 kΩ AU1-EAU VOL- switch: push Approx. 3.1 kΩ AU2-EAU No switch is pushed Approx. 100 kΩ AU2-EAU MODE switch: push Approx. 0 Ω If the result is not as specified, replace the steering pad switch LH.
- Measure the resistance according to the values in the table below.