Front Speed Sensor Components: Installation

HINT:

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.

1. INSTALL FRONT SPEED SENSOR LH 
   1. Install the speed sensor with the bolt.

      Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf) 

      NOTE: Keep the sensor tip and sensor installation hole free from foreign matter.
      Fig 1: Locating Speed Sensor With Bolt (LH)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Install the speed sensor to the body with the 2 bolts.

      Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf) for bolt A 

      29 N*m (296 kgf*cm, 21 ft.*lbf) for bolt B 

      Fig 2: Identifying Speed Sensor Bolts (LH)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Connect the connector and attach the clamp.
   Fig 3: Identifying Connector (LH)
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL FRONT FENDER LINER LH (See  INSTALLATION  ) 
3. INSTALL FRONT WHEEL 

   Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf) 

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
5. PERFORM INITIALIZATION 
   1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
6. CHECK ABS SPEED SENSOR SIGNAL 
   1. Check the ABS speed sensor signal (see DIAGNOSIS SYSTEM  ).