Differential Oil Seal: Installation

INSTALL TRANSAXLE HOUSING OIL SEAL
1. Using SST and a hammer, tap in a new oil seal.
  Standard depth: - 0.5 to 0.5 mm (- 0.020 to 0.020 in.)
  
  SST 09316-60011 (09316-00011), 09950-70010 (09951-07200)
2. Coat the lip of the oil seal with MP grease.
  
  Fig 1: Identifying Special Service Tool For Oil Seal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL
1. Using SST and a hammer, tap in a new oil seal.
  SST 09649-17010, 09950-70010 (09951 -07150)
  
  Standard depth: - 0.5 to 0.5 mm (- 0.020 to 0.020 in.)
2. Coat the lip of the oil seal with MP grease.
Fig 2: Installing Oil Seal
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT DRIVE SHAFT ASSEMBLY LH
1. Install the drive shift (see INSTALLATION ).
INSTALL FRONT DRIVE SHAFT ASSEMBLY RH
1. Install the drive shift (see INSTALLATION ).
INSTALL ENGINE UNDER COVER RH
INSTALL ENGINE UNDER COVER LH
INSTALL FRONT WHEEL
Torque: 103 N*m (1050 kgf*cm, 76 ft.*lbf)
ADD AUTOMATIC TRANSAXLE FLUID
Fluid type: Toyota Genuine ATF WS

Standard capacity: 3.5 liters (3.7 US qts, 3.1 Imp. qts)
INSPECT AUTOMATIC TRANSAXLE FLUID
1. Inspect the fluid (see AUTOMATIC TRANSAXLE FLUID ).