Torque Specifications
TORQUE SPECIFICATIONS
| Part tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| VANE PUMP ASSEMBLY | ||||
| Vane pump housing rear at Vane pump housing front | 22 | 224 | 16 | |
| Power steering oil pressure sensor | 21 | 214 | 15 | |
| Pressure port union | 69 | 704 | 51 | |
| Pump bracket front at Vane pump bracket rear | 44 | 449 | 32 | |
| Oil reservoir set bolt | 9.0 | 92 | 80 in.*lbf | |
| Vane pump assembly set bolt | 44 | 449 | 32 | |
| Vane pump housing rear at Power steering pump heat insulator | 44 | 449 | 32 | |
| Pressure feed tube assembly at Vane pump assembly | 44.1 (41) | 450 (414) | 33 (30) | |
| POWER STEERING LINK ASSEMBLY | ||||
| Control vane housing at Rack housing | 21 | 214 | 15 | |
| Rack guide spring cap lock nut | 28 (39) | 286 (398) | 21 (29) | |
| Power steering rack at Steering rack end sub-assembly | 60 (83.4) | 614 (850) | 44 (61) | |
| Tie rod end sub-assembly lock nut | 74 | 750 | 54 | |
| Steering right and left turn pressure tubes | 12 (13) | 118 (133) | 9 (10) | |
| Power steering link assembly set bolt | 74 | 749 | 54 | |
| Steering intermediate shaft set bolt | 28 | 290 | 21 | |
| Power steering rack housing heat insulator set bolt | (a): | 18 | 178 | 13 in.*lbf |
| (b): | 35 | 360 | 26 in.*lbf | |
| Front suspension crossmember subassembly set bolt | A: | 116 | 1,183 | 86 |
| B: | 70 | 714 | 52 | |
| Engine mounting insulator RR at Front suspension crossmember sub-assembly | 72 | 734 | 53 | |
| Front suspension member reinforcement LH and RH set bolt | 47 | 479 | 35 | |
| Pressure feed tube assembly at Power steering link assembly | 27 (25) | 273 (255) | 20 (18) | |
| Pressure feed assembly clamp set bolt | 7.8 | 80 | 69 in.*lbf | |
| Steering sliding yoke sub-assembly at Steering intermediate shaft | 28 | 290 | 21 | |