LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2006 >> xB Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> U340E Automatic Transaxle >> Transmission Wire >> Inspection

Transmission Wire: Inspection

  1. INSPECT TRANSMISSION WIRE (ATF TEMPERATURE SENSOR) 
    1. Disconnect the E1 wire connector.
    2. Measure the resistance of the transmission wire.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION

      Tester Connection Specified Condition
      1 (THO) - 6 (E2) 79 to 156 kΩ
      1 (THO) - Body ground 10 kΩ or higher
      6 (E2) - Body ground 10 kΩ or higher
      Fig 1: Inspecting Transmission Wire (ATF Temperature Sensor)
      G04227501Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT:

      If the resistance is not as specified for either of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.

      Standard resistance 

      SPECIFIED CONDITION

      ATF Temperature Specified Condition
      10°C (68°F) 6.4 kΩ
      110°C (230°F) 0.2 kΩ
scientia non olet · About LEMON Manuals