Transmitter Battery: Replacement

REMOVE TRANSMITTER BATTERY
NOTE: Take extra care when handling these precision electronic components.
1. Using a screwdriver, pry out the transmitter case.
  HINT:
  
  Tape the screwdriver tip before use.
  
  NOTE: Do not forcibly pry out the case.
  
  Fig 1: Removing Transmitter Battery Using Screwdriver
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the battery (lithium battery).
  NOTE:
  - Do not push the terminals with your finger.
  - Do not forcibly pry up the battery (lithium battery). The terminals may become damaged.
  - Do not touch the battery with wet hands. Water may cause rust.
  - Do not touch or move any components inside the transmitter.
    
    Fig 2: Removing Lithium Battery
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL TRANSMITTER BATTERY
1. Install a new battery (lithium battery) with the positive (+) side up, as shown in the illustration.
  NOTE:
  - Be sure that the positive (+) and negative (-) sides of the transmitter battery are correctly matched up to the transmitter terminals.
  - Be careful not to bend the transmitter battery electrode during insertion.
  - Keep the transmitter case interior free of dust and oil.
2. Install the case securely.
  
  Fig 3: Installing Lithium Battery With Positive (+) Side Up
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002