DTC Summary

DTC SUMMARY

DTC No.	Monitoring Items	Malfunction Detection Conditions	Trouble Areas	Detection Timing	Detection Logic
P043E	Reference orifice clogged	P043E, P043F, P2401, P2402 and P2419 are present when one of the following conditions is met during key-off EVAP monitor: EVAP pressure just after reference pressure measurement greater than -1 kPa-g (755 mmHg-a) Reference pressure less than -4.85 kPa-g (726 mmHg-a) Reference pressure greater than -1 kPa-g (755 mmHg-a) Reference pressure is not saturated Reference pressure difference between first and second is 0.7 kPa-g (5 mmHgg) or more HINT: These values are typical	Canister pump module (Reference orifice, leak detection pump, vent valve) Connector/wire harness (Canister pump module - ECM) EVAP system hose (pipe from air inlet port to canister pump module, canister filter, fuel tank vent hose) ECM	Ignition switch OFF	2 trip
P043F	Reference orifice high-flow	P043E, P043F, P2401, P2402 and P2419 are present when one of the following conditions is met during key-off EVAP monitor: EVAP pressure just after reference pressure measurement greater than -1 kPa-g (755 mmHg-a) Reference pressure less than -4.85 kPa-g (726 mmHg-a) Reference pressure greater than -1 kPa-g (755 mmHg-a) Reference pressure is not saturated Reference pressure difference between first and second is 0.7 kPa-g (5 mmHgg) or more HINT: These values are typical	Canister pump module (Reference orifice, leak detection pump, vent valve) Connector/wire harness (Canister pump module - ECM) EVAP system hose (pipe from air inlet port to canister pump module, canister filter, fuel tank vent hose) ECM	Ignition switch OFF	2 trip