Front suspension
FRONT SUSPENSION SERVICE DATA SPECIFICATION
| Front wheel alignment | Vehicle height | A - B: D - C: |
92 mm (3.62 in.) 63 mm (2.48 in.) |
| Toe-in (total) Rack end length difference |
0°+- 12' (0°+- 0.2°), 0 +- 2 mm (0 +- 0.08 in.) 1.5 mm (0.0059 in.) or less |
||
| Wheel angle | Inside wheel | 38°12' (36°12' to 40°12') 38.20° (36.20° to 40.20°) |
|
| Outside wheel: Reference | 32°49' 32.82° |
||
| Camber Right-left error |
-0°31' +- 45' (-0.52° +- 0.75°) 45' (0.75°) or less |
||
| Caster Right-left error |
3°02' +- 45' (3.03° +- 0.75°) 45' (0.75°) or less |
||
| Steering axis inclination Right-left error |
12°31' +- 45' (12.52° +- 0.75°) 45' (0.75°) or less |
||
| Front suspension | Lower ball joint turning torque | 5.0 N.m (51 kgf.cm, 44 48 in.lbf) or less | |
| Front stabilizer link turning torque | 1.0 N.m (10 kgf.cm, 8.9 48 in.lbf) or less | ||
A: Ground clearance of front wheel center
B: Ground clearance of lower suspension arm front bolt center
C: Ground clearance of tire rod set bolt center
D: Ground of rear wheel center