LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2006 >> tC Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock >> Power Door Lock Control System >> Problem Symptoms Table

Problem Symptoms Table

HINT:

Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

PROBLEM SYMPTOMS

Symptom Suspected area See Procedure
All doors cannot be locked/unlocked simultaneously 1. DCC fuse ALL DOORS CANNOT BE LOCKED / UNLOCKED SIMULTANEOUSLY 
2. ECU-B fuse ALL DOORS CANNOT BE LOCKED / UNLOCKED SIMULTANEOUSLY 
3. DOOR fuse ALL DOORS CANNOT BE LOCKED / UNLOCKED SIMULTANEOUSLY 
4. IG1 relay ALL DOORS CANNOT BE LOCKED / UNLOCKED SIMULTANEOUSLY 
5. Power window regulator master switch assembly ALL DOORS CANNOT BE LOCKED / UNLOCKED SIMULTANEOUSLY 
6. Door control switch assembly (passenger side) ALL DOORS CANNOT BE LOCKED / UNLOCKED SIMULTANEOUSLY 
7. Front door lock assembly RH ALL DOORS CANNOT BE LOCKED / UNLOCKED SIMULTANEOUSLY 
8. Front door lock assembly LH ALL DOORS CANNOT BE LOCKED / UNLOCKED SIMULTANEOUSLY 
9. Wire harness ALL DOORS CANNOT BE LOCKED / UNLOCKED SIMULTANEOUSLY 
10. Instrument panel junction block assembly (integration relay) ALL DOORS CANNOT BE LOCKED / UNLOCKED SIMULTANEOUSLY 
Key lock-in prevention function does not work properly (manual operation and key-linked lock are active) 1. Front door courtesy light switch assembly KEY LOCK-IN PREVENTION FUNCTION DOES NOT WORK PROPERLY (MANUAL OPERATION AND KEY-LINKED LOCK ARE ACTIVATED) 
2. Unlock warning switch assembly KEY LOCK-IN PREVENTION FUNCTION DOES NOT WORK PROPERLY (MANUAL OPERATION AND KEY-LINKED LOCK ARE ACTIVATED) 
3. Wire harness KEY LOCK-IN PREVENTION FUNCTION DOES NOT WORK PROPERLY (MANUAL OPERATION AND KEY-LINKED LOCK ARE ACTIVATED) 
4. Instrument panel junction block assembly (integration relay) KEY LOCK-IN PREVENTION FUNCTION DOES NOT WORK PROPERLY (MANUAL OPERATION AND KEY-LINKED LOCK ARE ACTIVATED) 
Only back door cannot be opened (unlocked) 1. Back door lock assembly ONLY BACK DOOR CANNOT BE OPENED (UNLOCKED) 
2. Back door opener witch assembly ONLY BACK DOOR CANNOT BE OPENED (UNLOCKED) 
3. Wire harness ONLY BACK DOOR CANNOT BE OPENED (UNLOCKED) 
4. Instrument panel junction block assembly (integration relay) ONLY BACK DOOR CANNOT BE OPENED (UNLOCKED)