How To Proceed With Troubleshooting

HINT:

Use this procedure to troubleshoot the power door lock control system.

1. VEHICLE BROUGHT TO WORKSHOP 

   NEXT 

2. INSPECT BATTERY VOLTAGE 

   Standard voltage: 11 to 14 V 

   If the voltage is below 11 V, recharge or replace the battery before proceeding.

   NEXT 

3. PROBLEM SYMPTOMS TABLE 

   Result: 

   RESULT
   
   

   Result	Proceed to
   Fault is not listed in problem symptoms table.	A
   Fault is listed in problem symptoms table.	B

   B : Go to step   4 

   A : Go to next step 

4. OVERALL ANALYSIS AND TROUBLESHOOTING 
   1. TERMINALS OF ECU 

   NEXT 

5. ADJUST, REPAIR OR REPLACE 

   NEXT 

6. CONFIRMATION TEST 

   NEXT : END