Shift Lock Control Switch (ATM): Inspection

WARNING: This page is about a different variant/trim than selected.

INSPECT SHIFT LOCK CONTROL SWITCH
1. Disconnect the connector of the shift lock control switch.
2. Measure the resistance according to the value(s) in the table below.
  
  Fig 1: Identifying Shift Lock Control Switch Terminals
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Fig 2: Resistance Reference Table
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect terminal STP to the battery positive (+) terminal and terminal E to the battery negative (-) terminal, and apply about 12 V between terminals STP and E.
  
  Fig 3: Measuring Resistance
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Measure the resistance according to the value(s) in the table below.
Fig 4: Resistance Reference Table
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002