LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2004 >> xA Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2425 (Engine Control System - DTCS P1148 To P2A03) >> DTC P1212 TCS Communication Line >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is more than 10.5V at idle  .

  1. Start engine and let it idle for at least 10 seconds.
  2. Check 1st trip DTC.
  3. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "

Follow the procedure "WITH CONSULT-III" above.

scientia non olet · About LEMON Manuals