Rear Wheel Alignment: Inspection

INSPECT TIRE (See WHEEL & TIRE SYSTEM )
MEASURE VEHICLE HEIGHT (See FRONT WHEEL ALIGNMENT )
NOTE: Before inspecting wheel alignment, adjust the vehicle height to the specified value.
INSPECT TOE-IN
Toe-in:

Fig 1: Inspecting Rear Wheel Alignment
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the toe-in is not within the specified value, inspect the suspension parts and replace them if necessary.

Fig 2: Toe-In Inspection Chart
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT CAMBER
1. Install the camber-caster-kingpin gauge or position the vehicle on a wheel alignment tester.
2. Inspect the camber.
Camber:

Fig 3: Camber Inspection Chart
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the measured value is not within the specified value, inspect the suspension parts for damage and/or wear, and replace them if necessary because the camber is not adjustable.