LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2010 >> Vue XE, 3.5 N >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.5L - Repair Instructions >> Repair Instructions >> Knock Sensor Replacement - Bank 2 >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Knock Sensor
    GM1800587Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Position the knock sensor to the engine block and install the knock sensor bolt.

    Tighten 

    Tighten the bolt to 25 N.m (18 lb ft).

    2. Fig 2: Knock Sensor
    GM1887295Courtesy of GENERAL MOTORS COMPANY
  2. Connect the engine wiring harness electrical connector (3) to the knock sensor (2).
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals