LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2010 >> Vue XE, 3.5 N >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.5L - Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Engine Wiring Harness Heat Shield Bolts
    GM1887297Courtesy of GENERAL MOTORS COMPANY
  1. Remove the right catalytic converter. Refer to Catalytic Converter Replacement - Right Side (LZ4) .
  2. Remove the engine wiring harness heat shield nut (3).
  3. Remove the engine wiring harness heat shield bolts (1 and 4).
  4. Remove the engine wiring harness heat shield (2).
    5. Fig 2: Knock Sensor & Crankshaft Position Sensor & Connectors
    GM1887298Courtesy of GENERAL MOTORS COMPANY
  5. Disconnect the engine wiring harness electrical connector (4) from the crankshaft position (CKP) sensor (3).
    6. Fig 3: View Of CKP Sensor
    GM1587763Courtesy of GENERAL MOTORS COMPANY
  6. Remove the CKP sensor stud.
  7. Remove the CKP sensor.
scientia non olet · About LEMON Manuals