LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2010 >> Sky Base, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Fixed And MOVEABLE Windows System >> Diagnostic Information and Procedures >> Power Windows Malfunction >> Component Testing >> Driver Window Switch

Driver Window Switch

  1. Ignition OFF, disconnect the harness connector at the driver window switch.
  2. Test for infinite resistance between the control terminals A and D and the RAP terminal C with the RF window switch in the inactive position.
    • If not the specified value, replace the driver window switch.
  3. Test for less than 2 ohms between the control terminal A and the RAP terminal C with the RF window switch in the up position.
    • If greater than the specified range, replace the driver window switch.
  4. Test for less than 2 ohms between the control terminal D and the RAP terminal C with the RF window switch in the down position.
    • If greater than the specified range, replace the driver window switch.
  5. Test for infinite resistance between the control terminals G and H and the RAP terminal C with the driver window switch in the inactive position.
    • If not the specified value, replace the driver window switch.
  6. Test for less than 2 ohms between the control terminal G and the RAP terminal C with the driver window switch in the up position.
    • If greater than the specified range, replace the driver window switch.
  7. Test for less than 2 ohms between the control terminal H and the RAP terminal C with the driver window switch in the down position.
  8. If greater than the specified range, replace the driver window switch.
scientia non olet · About LEMON Manuals