LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2009 >> Vue XE, 2.4 P >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.4L - Introduction >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Fuel Level Sensor Retainers
    GM1885310Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel level sensor cover (3) to the fuel level sensor (2).
  2. Ensure that the fuel level sensor retainers (1) are fully engaged to the cover.
  3. Position the fuel level sensor to the fuel tank fuel pump module and slide the sensor down into position.
    4. Fig 2: Fuel Level Sensor Electrical Connector
    GM1885305Courtesy of GENERAL MOTORS CORP.
  4. Connect the fuel level sensor electrical connector (1) to the fuel tank fuel pump module cover.
    5. Fig 3: Fuel Tank Fuel Pump Module Reservoir Retaining Features
    GM1885307Courtesy of GENERAL MOTORS CORP.
  5. Install the fuel level sensor wiring behind the retaining features (1) molded into the fuel tank fuel pump module reservoir.
  6. Install the fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement .
scientia non olet · About LEMON Manuals