Installation Procedure
WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
- Install the bulb/socket to fog lamp. Refer to Front Fog Lamp Bulb Replacement .
- Install the fog lamp (1) to the fascia.
- Install fog lamp nuts (3).
Tighten: Tighten the nuts to 6 N.m (53 lb in).
- Connect the fog lamp electrical connector to the bulb/socket (2).
- Inspect the fog lamp for proper operation.
- Install the front fascia lower close out panel. Refer to Front Bumper Fascia Lower Close Out Panel Replacement .
- Aim the fog lamp. Refer to Fog Lamp Aiming .
NOTE:
Refer to Fastener Notice
.