Installation Procedure
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Install the yaw rate sensor/lateral accelerometer (1).
- Install the 2 yaw rate sensor/lateral accelerometer nuts (2).
Tighten: Tighten the yaw rate sensor/lateral accelerometer mounting nuts to 25 N.m (18 lb ft).
- Connect the yaw rate sensor/lateral accelerometer electrical connector (2) to the yaw rate sensor/lateral accelerometer (1).
- Install the front floor center console. Refer to Console Replacement - Front Floor in Instrument Panel, Gages and Console.
- Perform the ABS Diagnostic System Check. Refer to Diagnostic System Check - Vehicle in Vehicle DTC Information.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.