LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2009 >> Vue Red Line, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Battery Retaining Bolt And Retainer Block
    GM2026270Courtesy of GENERAL MOTORS CORP.
  1. Position the battery (1) into the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the battery retaining bolt (2) and retainer block (3) and tighten to 10 N.m (89 lb in).
    3. Fig 2: Positive Battery Cable Retaining Nut
    GM2026268Courtesy of GENERAL MOTORS CORP.
  3. Install the positive battery cable to the battery (1).
  4. Tighten the positive battery cable retaining nut (2) to 5 N.m (45 lb in)..
    5. Fig 3: Battery Upper And Lower Cover
    GM2026257Courtesy of GENERAL MOTORS CORP.
  5. Install the battery upper (1) cover to the battery lower cover (3).
  6. Ensure that the two retaining tabs (2) are securely latched.
    7. Fig 4: Engine Control Module
    GM2026256Courtesy of GENERAL MOTORS CORP.
  7. Slide the engine control module assembly (2) onto the battery upper cover (3).
  8. Ensure that the tab (1) retaining the engine control Module (2) is securely latched.
  9. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection 
scientia non olet · About LEMON Manuals