LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2009 >> Vue Red Line, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Battery Current Sensor
    GM1822982Courtesy of GENERAL MOTORS CORP.
  1. Remove the battery positive and negative cable. Refer to Battery Positive and Negative Cable Replacement (LZ4)  or Battery Positive and Negative Cable Replacement (LY7)  or Battery Positive and Negative Cable Replacement (LE5) .
  2. Mark the location of the battery current sensor on the battery positive and negative cable with tape for reference during installation.
  3. Remove the tape securing the battery current sensor to the battery positive and negative cable.
  4. Mark the location of the battery positive and negative cable clips and remove the clips from the cable.
  5. Squeeze the battery positive and negative cable branches together.
    6. IMPORTANT: Note the orientation of the battery current sensor prior to removal.
  6. Slide the battery current sensor (1) off of the battery positive and negative cable.
scientia non olet · About LEMON Manuals