LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2009 >> Sky Red Line, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 2.4L - Introduction) >> Repair Instructions >> Throttle Body Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Throttle Body
    GM1578462Courtesy of GENERAL MOTORS CORP.
  1. Inspect the throttle body gasket and replace if necessary.
  2. Position the throttle body to the intake manifold.
    CAUTION: Refer to Fastener Caution .
  3. Install the throttle body bolts and tighten to 10 N.m (89 lb in).
    4. Fig 2: Identifying Fuel System Electrical Connectors & Harness Clips
    GM1590626Courtesy of GENERAL MOTORS CORP.
  4. Connect the ETC electrical connector (3).
  5. Install the air cleaner outlet. Refer to Air Cleaner Outlet Resonator Replacement .
  6. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  7. Perform the throttle learn procedure. Refer to Throttle/Idle Learn .
scientia non olet · About LEMON Manuals