LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2009 >> Sky Red Line, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 2.4L - Introduction) >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of ECT Sensor
    GM1713085Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the ECT.

    Tighten:  Tighten the sensor to 20 N.m (15 lb ft).

    2. Fig 2: Identifying CMP Sensor & ECT Sensor Electrical Connectors
    GM1591858Courtesy of GENERAL MOTORS CORP.
  2. Connect the engine wiring harness electrical connector (6) to the ECT sensor.
  3. Fill the cooling system as needed. Refer to Cooling System Draining and Filling (GE-47716) or Cooling System Draining and Filling (2.4L LE5) .
scientia non olet · About LEMON Manuals