Removal Procedure
WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Lower the headliner assembly. Do not remove from vehicle. Refer to Headlining Trim Panel Replacement .
- Remove the antenna cable connection from above the AM/FM antenna module.
- Remove the foam tape from the antenna cable connection.
- Disconnect the digital radio antenna connectors (1).
- Remove the antenna bolt (2) and expansion sleeve (3).
- Remove the digital radio antenna.
NOTE:
DO NOT apply paint or clear coat to the antenna. This will damage the function of the antenna, causing poor reception or loss of signal reception.
NOTE:
Use care when removing or installing the headliner. Excessive bending will damage the headliner.