Antenna Cable Replacement

WARNING: This page is about a different car, the 2008 Saturn Sky and 2008 Pontiac Solstice. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Antenna Cable

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement . Remove the rear window panel trim. Refer to Rear Window Panel Trim Replacement . Remove the passenger side door sill plate. Refer to Door Sill Plate Replacement . Remove the instrument panel (I/P) trim pad. Refer to Instrument Panel Trim Pad Replacement (Solstice) .
1	Radio Antenna Cable Assembly Procedure: The AM/FM radio antenna cable is part of the body electrical harness, to replace do the following : Route the cable next to the body wiring harness and secure to the harness with tie straps. Cut both ends of the original antenna cable.

Callout

Component Name

Preliminary Procedure

Remove the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement .
Remove the rear window panel trim. Refer to Rear Window Panel Trim Replacement .
Remove the passenger side door sill plate. Refer to Door Sill Plate Replacement .
Remove the instrument panel (I/P) trim pad. Refer to Instrument Panel Trim Pad Replacement (Solstice) .

Radio Antenna Cable Assembly
Procedure:
The AM/FM radio antenna cable is part of the body electrical harness, to replace do the following :

Route the cable next to the body wiring harness and secure to the harness with tie straps.
Cut both ends of the original antenna cable.