Backup Lamp Replacement

WARNING: This page is about a different car, the 2010 Saturn Sky and 2010 Pontiac Solstice. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Backup Lamp

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (SKY) or Rear Bumper Fascia Replacement (Solstice) . Remove the 2 lower back up lamp screws from the rear bumper valance center panel.
1	Back Up Lamp Assembly Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
2	Back Up Lamp Assembly Tip: Replace the lamp bulb, if needed.

Callout

Component Name

Preliminary Procedures

Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (SKY) or Rear Bumper Fascia Replacement (Solstice) .
Remove the 2 lower back up lamp screws from the rear bumper valance center panel.

Back Up Lamp Assembly Screw (Qty: 4)

CAUTION: Refer to Fastener Caution .

Tighten: 2 N.m (18 lb in)

Back Up Lamp Assembly
Tip: Replace the lamp bulb, if needed.