LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2009 >> Sky Red Line, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.0L - Introduction >> Repair Instructions >> Camshaft Position Sensor Replacement - Exhaust >> Installation Procedure

Installation Procedure

    Fig 1: View Of CMP Sensor
    GM1578483Courtesy of GENERAL MOTORS CORP.
    NOTE: Inspect the CMP sensor for damage. Replace as necessary.
  1. Lubricate the CMP sensor O-ring seal with clean engine oil.
  2. Install the CMP sensor. (Intake CMP shown, exhaust CMP similar)
    CAUTION: Refer to Fastener Caution .
  3. Install the CMP sensor bolt and tighten to 10 N.m (89 lb in).
    4. Fig 2: Identifying ECT Sensor Engine Wiring Harness Electrical Connector
    GM1826284Courtesy of GENERAL MOTORS CORP.
  4. Connect the engine wiring harness electrical connector (4) to the exhaust CMP sensor.
scientia non olet · About LEMON Manuals