LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2009 >> Aura Green Line >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.4L - Introduction >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying MAP Sensor
    GM1889727Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the NEW MAP sensor seal with clean engine oil.
  2. Install the MAP sensor (1) into the intake manifold.
    3. Fig 2: Identifying Fuel Injector Wiring Harness Clips & Connectors
    GM1889726Courtesy of GENERAL MOTORS CORP.
  3. Connect the fuel injector wiring harness electrical connector (2) to the number 3 fuel injector.
  4. Install the fuel injector wiring harness clips (1) to the fuel rail tabs.
    5. Fig 3: Identifying Fuel Injector Wiring Harness Electrical Connector
    GM1889725Courtesy of GENERAL MOTORS CORP.
  5. Connect the fuel injector wiring harness electrical connector (1) to the MAP sensor.
    6. Fig 4: Identifying EVAP Canister Purge Tube
    GM1889722Courtesy of GENERAL MOTORS CORP.
  6. Position the EVAP canister purge tube (1) out of the way.
  7. Connect the EVAP canister purge tube to the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service .
  8. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
scientia non olet · About LEMON Manuals